高强螺栓的位置要合理，要考虑扭断器及扭矩扳手的施工空间，不要在安装时，因为空间太小，扭断器及扭矩扳手无法就位等，导致高强螺栓梅花头无法拧断或高强螺栓无法拧紧。曾经碰到过有的设计连套筒的位置都不给。
高强螺栓连接板如果有可能，尽量采用上下对称的螺栓布置方法。曾经有中接点上面4个下面6个，车间工人搭装不小心将一部分搞反了，在现场对不起来。

轻钢结构如果有维护砖墙，一定要提前与建设单位及土建施工单位对接好，因为这涉及到土建和钢结构两个方面的问题，因为土建的砖墙很可能搞不平直，可彩钢板的泛水又不可能做得忽大忽小，结果是彩钢板与砖墙的缝隙忽大忽小，彩钢板与砖墙的泛水处理时很难搞好，让建设单位有心里准备。

The location of the high strength bolts should be reasonable, want to consider the construction of twist off, and the torque wrench space, do not install in, because the space is too small, twist off, and the torque wrench can not in place, etc., result in high strength bolt wobbler can't wring or high strength bolts can't tighten. Once encountered some design don't even give the location of the sleeve.

High strength bolt connection board if possible, try to adopt symmetrical bolt layout method. Had contact in the above four the following six, workshop workers take accidentally part will make the wrong, I'm sorry to at the scene.

If there is a light steel structure maintenance brick wall, be sure to dock with the construction units and construction units in advance, because it involves two aspects of the civil and steel structure, because the civil brick wall is likely to be not straight, but choi steel pan of water and can't do big and small, the result is choi steel and brick wall crack big and small, choi steel and brick wall is difficult to do a good job in water treatment, make the construction unit has a heart to prepare.

寿县合兴钢结构有限公司是专业从事安徽钢结构,合肥彩钢瓦,寿县钢结构,合肥钢结构公司

官方网站：http://www.sxhxgjg.com