该项目造型设计动感轻巧，钢结构施工既要保证“体重不超标”，又要“身板够结实”。如何将5000余根非标准杆件和1500个大小不同的节点个性化设计和制造完美地结合在一起是一道不小的难题，据中建钢构设计人员介绍，他们在进行了反复研究之后，从蜂窝得到启发，创造性地采用内外双层空心六棱柱节点形式，有效降低结构自重四分之一，且结构连接稳定。在制造环节，该项目也“遭遇”到不少难点。

   项目钢构工程每个节点均由6种规格共计48块零件板组拼而成，直径从40厘米到100厘米不等，焊缝条数则从40条至50条，中建钢构制造人员介绍说，这种节点的焊接简直就是在绣花，然而通过同心圆定位优化、焊缝优化等措施，有效将制造精度误差严格控制在英标规范要求的3毫米以内。在安装过程中，则运用点式支撑体系在狭小空间内通过144个支撑点保证传力路径明确，同时采用三维坐标法很好地控制了安装精度。

The project design move feeling, light steel structure construction should not only guarantee the "excessive weight", and "plate strong enough". How to more than 5000 root is not par 1500 nodes of different size and personalized design and manufacture of perfectly together is a big problem, according to zhongjian steel structure design personnel, after they studied the over and over again, from the cellular and creatively USES the internal and external double-layer hollow prism six node form, effectively reduce the weight of a quarter, connection and structure stability. In the manufacturing process, the project also "encounter" to a lot of difficulties.

Steel structure engineering project are each node by six kinds of specifications for a total of 48 parts board spellers, ranging from 40 cm to 100 cm in diameter, weld article number from 40 to 50, zhongjian steel structure manufacturing personnel, according to the welding of this node is in embroidery, however, weld optimization measures are optimized by the concentric circles positioning, effective will strictly control the manufacturing precision error in British standard specification requirements within 3 mm. During the installation process, the use of point supporting system in a small space in the force transmission path through 144 points to ensure clear, at the same time, 3 d coordinate method is used to control well the installation accuracy.

寿县合兴钢结构有限公司是专业从事安徽钢结构,合肥彩钢瓦,寿县钢结构,合肥钢结构公司

官方网站：http://www.sxhxgjg.com