咨询电话:0554-4991161
技术服务
联系我们

电话:0554-4991161
手机:18175036696 
         13588259339
传真:0554-4991161
地址:寿县炎刘镇二环
路与新桥大道路口向东100米

当前的位置:网站首页 >> 技术服务 >> 技术服务 技术服务

钢结构玻璃幕墙的安装准备工作

发布时间:2016-4-25 9:25:37 浏览次数:548

A,设计图纸


A, design drawings.


①外墙环境调查地区的基本风压、地面粗糙类别、外墙位置高度;防御珍岛建筑结构形式;当地历史最高温度、最低温度和太阳辐射热、香、外墙等设计计算整个准备一定确定参数。


1. The exterior environment of the survey area basic wind pressure, surface roughness categories, wall height; defense Jindo building structure; local history maximum temperature, minimum temperature and solar radiation heat, incense, walls and other design and calculation of the prepared some uncertain parameters.


施工图设计。设计应按照《透明的玻璃幕墙技术规范的规定执行建筑设计公司主要考虑透明工程的防火、防雷、光和环境污染。。。。结构安全等因素。外墙施工规划设计公司,充分掌握建筑设计的透明原来设计构思的基础上重新设计使建筑设计创作的机制达到更高层次的建筑美学的要求,保证外墙安全、可靠的外墙设计时计算。而且,规范的严格执行一些构造措施都必须执行。


Construction design. The design should be in accordance with the "transparent glass curtain wall technical specification provisions of the architectural design company mainly considered transparent engineering fire protection, lightning protection, light and environmental pollution.... The structural safety factor. Wall construction planning and design company, to fully grasp the architectural design of the transparent original design idea based on re design the architectural design and creation of the mechanism to achieve the requirements of higher level of architectural aesthetics, ensure the wall safe and reliable design of the external walls of the calculation. Moreover, some construction measures must be implemented in the strict implementation of the specification.


B、样加工


B, sample processing


①放样,所有工程在加工前,根据施工图进行任何检查施工图翻来制作大小及各节点部位的模范,模型是进行必要的加工部分依据。


Lofting, all engineering before processing, according to the construction drawings for any examination of construction drawing turn to make size and each node of the parts of the model. The model is a necessary part of the processing basis.


笔下的材料,外墙条件下料前必须进行校正列队复查材料及质量。


Material under the pen, the external wall conditions must be calibrated before the review of the materials and quality.


单元式幕墙加工嘴儿,换种及酒吧,对工作及组件、茄子和建筑物之间必须安装)连接,最终形成透明。这一目标上实现对孔、槽、榫加工后还不如。你对这个阶段的监理业务的外墙所种下料是否正确,对抽样检查、孔、槽、裂榫加工后的尺寸偏差在规范。


Unit type curtain wall processing nozzle, and the bar, the work and components, eggplant and buildings must be installed between the connection, the final form of transparency. The hole, the groove and the tenon processing is better than the goal. You on this stage supervision business facades of the material is correct, and the sampling inspection, holes, slots, crack processing tenon and mortise dimension deviation in the specification.


C,组件(开启扇,框)。


C, component (open fan box).


组件之间的连接件,按设计分别采用铆钉、螺丝供给牢固,各连接处进行可靠的密封处理。拼装好箱工作必须垂直堆下있는用敷软套轨枕垫不乱地上堆有


Connections between components, according to the design of rivets and screws were used to supply strong connections and reliable sealing. The assembled box must be vertical pile under application soft sleeper pad chaos on the stack



寿县合兴钢结构有限公司是专业从事安徽钢结构,合肥彩钢瓦,寿县钢结构,合肥钢结构公司

官方网站:http://www.sxhxgjg.com


最新内容:

版权所有:寿县合兴钢结构有限公司 合肥网络布线
电话:0554-4991161    手机:18175036696  13588259339

传真:0564-4991161  地址:寿县炎刘镇二环路与新桥大道路口向东100米 网站地图