咨询电话:0554-4991161
技术服务
联系我们

电话:0554-4991161
手机:18175036696 
         13588259339
传真:0554-4991161
地址:寿县炎刘镇二环
路与新桥大道路口向东100米

当前的位置:网站首页 >> 技术服务 >> 技术服务 技术服务

寿县合兴浅谈钢结构幕安装墙需要注意什么?

发布时间:2016-4-26 9:11:46 浏览次数:575

1。安装前


1. Before installation


①安装幕墙钢结构、混凝土结构及砌体结构主要工程必须按照有关施工规范及质量验收评定标准验收合格;再安装外墙的建筑部分的外形尺寸(主要是羊来重新检查)的要求及在膜壁配合尺寸在允许误差范围如果偏差的概况(透明处理等部分尺寸修改),以达到要求。


Install a glass curtain wall and steel structure, concrete structure and masonry structure main engineering must be about construction standard and assessment standards of quality acceptance acceptance qualified according to; to install the shape and the size of the external part of the building (mainly sheep and reexamine) requirements and the membrane wall with the size of in allowable error range if you modify the size deviation of the profile (dealing with transparency), to meet the requirements.


检查建筑物主体结构中每一笔固定连接的外墙。。。一个规定,要求。尺寸精度(标高偏差≤10mm;埋件表面和外墙很底面距离及设计允许误差比≤20mm;表面平整度偏差。。。5mm。≤),如果再偏差。。。处理了。按要求安装下一道工序。


Check the external wall of each fixed connection in the main structure of the building... A stipulation that requires. Dimensional accuracy (elevation deviation is less than or equal to 10mm; buried surface and the outer wall of the bottom plane distance and design allowable error rate is less than or equal to 20 mm; smooth surface deviation. 5mm. If the deviation is less than or equal)... Deal with. According to the requirements of the installation of the next process.


检查一个嘴儿所制作合格证书。合格证书,只允许有一个上安装。请带运到现场后,必须保存了专设仓库。


Check the certificate of qualification for one mouth. Qualified certificate, only allowed to have one on the installation. Please bring the goods to the scene, you must keep the special warehouse.


2。测量放线


2. Measuring line


透明分格轴线测量的测量也会合并绘制错误控制、分配、积累进行消化,对高层建筑不应大于3级风力情况下定时测量放线,并多次校正,确保外墙的高度和位置垂直确实很标准。


Transparent lattice axis measurement measurement will rendering error control, distribution and accumulation of digestion amalgamation, of high-rise buildings should not be greater than grade 3 wind timing measurement line, and multiple correction to ensure the height and position of the exterior vertical is indeed very standard.


3。设置


3. set up


。。。。连接及安装外墙,不需要预安装连接用连接角钢和非常连接螺孔中心线位置达到以下要求:标高±3mm;江上开孔中心线垂直方向±4mm,左右方向±3mm。连接角钢按上述要求词典安装后,安装有该站连接角钢三维方向调整非常正。立垂钓者和侧面垂直高度及设计标高。安装时,监理应透明旁站导演不同阶段进行,每一道工序简单质量要求下一道工序能发现问题及时通知施工方法。


.... Connection and installation of external wall, do not need to be pre installed and connected with the connecting angle and a connecting screw hole position of the center line of the meet the following requirements: elevation 3mm; Jiang open hole center line perpendicular to the direction of plus and minus 4mm, about the direction of 3mm. Connecting angle requirements according to the dictionary after installation, installation of the station connecting angle three-dimensional direction adjustment is very positive. The side vertical height and vertical anglers and design elevation. Installation and supervision should be transparent on-site director at different stages, every process is simple, the quality requirements, a process can be found problems in a timely manner to inform the construction method.


钢结构外墙当代一种新型墙上;钢结构外墙运用高建筑美学和建筑节能。


Steel structure external wall of a new type of wall; steel structure of the use of high architectural aesthetics and building energy efficiency.



寿县合兴钢结构有限公司是专业从事安徽钢结构,合肥彩钢瓦,寿县钢结构,合肥钢结构公司

官方网站:http://www.sxhxgjg.com


最新内容:

版权所有:寿县合兴钢结构有限公司 合肥网络布线
电话:0554-4991161    手机:18175036696  13588259339

传真:0564-4991161  地址:寿县炎刘镇二环路与新桥大道路口向东100米 网站地图